KFC door is mainly composed of door frame, door fan, door body glass, large handle, large hinge, door closer and so on. The door type can be installed indoors and outdoors. Each diaphragm door has two doors, the left one and the right one.
The thickness of the door is 40-60 mm. The frame on one side of the door fan is connected with the door frame by a large hinge. The upper and lower pull pins are installed on the frame on the other side of the door fan, and the shutter is installed on the top cross beam side of the door fan to connect with the door frame.
The large hinge of the door body adopts the bottom bolt tightening method, which is beautiful and generous and durable. The middle part of the door fan can increase the cross brace, which is beautiful and convenient for pedestrians to enter and exit. The door glass is toughened glass. Stainless steel handle is installed on the door body, which is beautiful and convenient for pedestrians to enter and exit. Material part: The door frame is made of high strength aluminium alloy profiles, surface treatment, color is optional.
The doors and fans are surrounded by sand-proof brushes and rubber strips to ensure the sealing performance of the doors.
The door glass is tempered with 5-10mm glass.
Domestic or imported door closer can be used as required.
KFC style door Advantages:
♥Treatment for profile surface: Anodize oxidation ,elect painting, powder coating.
♥Specialized plastic injection channel is set up at angle joint to ensure that the internal and back of the angle joint is sealed effectively,and strengthen the angle
♥Different heat insulation performance of different serial of profile and different glass can reach 2.8W/(m2k), 2.5 W/(m2k), 2.1 W/(m2k) or below 2.0 W/(m2k).
♥Different sound insulation performance of different glasses can reach 30dB, 35dB, 40dB.
♥Different strengthening club can reach different level of anti-wind and pressure performance.
Material: Aluminum profile, Glass, accessories, sealant,etc.
a.Aluminum alloy: Aluminum 6063-T5/T6, 50, 55, 60, 70, 80, 90, 100, 150 series.
b.Thickness : According to design (Customized)
c.Aluminum Color: Customized by clients’ requirements.
d.Surface treatment: Anodized / Power Coating / Elect etc.