Installation of doors, windows and panes
(1) The doors, windows and windows shall be installed after the surface decoration of the wall of the entrance has been completed and accepted.
(2) After the sliding doors and windows are fixed in the door and window frames, the doors and windows with glass are integrated into the sliding grooves in the frames, and the gap between the doors and windows can be adjusted.
(3) Open doors and windows flat and assemble the wall with the frame and fan lattice, fix and fix them before installing glass, that is, adjust the gap between the frame and the fan first, then install the glass into the fan and adjust the position, and finally insert sealant and sealant.
(4) The floor spring door shall be installed and fixed on the door frame and the floor spring main engine before installing the door fan. Firstly, the glass is embedded into the frame of the door fan and put into place together. Then, the gap between the frame and the fan is adjusted. Finally, the sealing strip and sealant of the door fan glass are filled in.
Aluminium frame sliding glass window
The sliding window not only has a large window width, large glass block, wide field of view, but also increases the indoor lighting, which effectively improves the brightness of the house; it does not occupy the extra space in the house regardless of the opening and closing state; the sliding window opens in one plane. It takes up less space and is convenient for installing screens.
PRODUCT FEATURES &PRODUCT CONFIGURATION:
Wind pressure proof
6063-T5 high quality thermal break aluminum profiles
6063-T5 high quality non-thermal break aluminum profiles
Single tempered glazing: 6mm; 8mm; 10mm; 12mm; ...
Double tempered glazing: 5mm+12A+5mm; 5mm+18A+5mm; ...
Laminated glazing: 8.76; 10.76; ...
Thermal insulation strip is imported EPDM
Seal strip is HAIDA Europe standard EPDM