Double Glazing UPVC Sliding Window

Construction requirements

(1) In order to give full play to the properties of powder coating and prolong the service life of the coating, the surface of the coating should be treated strictly at first.

(2) When spraying, the coating must be grounded completely to increase the spraying efficiency of powder coating.

(3) For coatings with large surface defects, conductive putty should be scraped to ensure the smoothness and smoothness of the coatings.

(4) After spraying, the objects need to be cured by heating and the curing conditions are based on the technical specifications of powder products, but the curing temperature and time must be fully guaranteed to avoid quality accidents caused by insufficient curing.

(4) Inspection immediately after powder spraying. If defects are found after solidification, they should be treated in time. If defects are found after solidification, the scope of defects is small, local and not affected. The surface of the coatings can be decorated with the same color powder and diluted with acetone. If the scope is large and the surface quality is affected, the coatings should be polished with sandpaper, sprayed again or removed with paint remover, and then re-sprayed.

Aluminium frame sliding glass window

The sliding window not only has a large window width, large glass block, wide field of view, but also increases the indoor lighting, which effectively improves the brightness of the house; it does not occupy the extra space in the house regardless of the opening and closing state; the sliding window opens in one plane. It takes up less space and is convenient for installing screens.