Coatings are prepared by mixing special resins, pigments, fillers, curing agents and other additives in a certain proportion, and then by hot extrusion and grinding and sieving processes. They are stable in storage at room temperature. They are prepared by electrostatic spraying, friction spraying (thermal setting method) or bed dipping (thermoplastic method) followed by heating, baking, melting and solidification to form a smooth and bright permanent coating, so as to achieve the purpose of decoration and corrosion prevention.
Its characteristics are:
1. The product does not contain toxicity, solvents and volatile toxic substances. Therefore, it has no poisoning, fire and discharge of "three wastes", which fully meets the requirements of the national environmental protection law.
2. The utilization ratio of raw materials is high. The powder produced by some well-known brand powder suppliers can be recycled. The highest utilization ratio can even be more than 99%.
3. After the pretreatment of the coated material, one-time construction can obtain enough film thickness without primer. It is easy to realize automatic operation, high production efficiency and low cost.
4. The coating has good compactness, adhesion, impact strength and toughness, high corner coverage, excellent chemical resistance and electrical insulation.
5. Safety and convenience in storage and transportation of powder coatings.
Aluminium frame sliding glass window
The sliding window not only has a large window width, large glass block, wide field of view, but also increases the indoor lighting, which effectively improves the brightness of the house; it does not occupy the extra space in the house regardless of the opening and closing state; the sliding window opens in one plane. It takes up less space and is convenient for installing screens.
6063-T5 high quality thermal break aluminium profile, thickness 2.0 mm
5mm+12A+5mm (A:Air);5mm+12A+5mm tinted; 5mm+12A+5mm Low-E; 5mm+27A+5mm
Single toughened glazing: 3/4/5/6/8/10/12/15/19/21//6.38/11.76mm
Laminated glazing: 5mm+0.76+5mm, 5mm+0.38+5mm
Australian brand: Doric
Stainless steel security mesh
Aluminium security mesh
Fiberglass fly screen
Retractable fly screen
Fluorine carbon coating
* Aluminum window production steps: